In this process an image is taken and then embedded under the molded

Plastic is a synthetic compound. It is produced in laboratories all over the world. It is extremely versatile and is found all round us. Plastic is liquid when it is in its natural form. It is cooled down and molded into various sized containers.It has large number of commercial uses.

Toys, bottles, utensils and jars are some of the most common examples made out of plastic that you can see all around you. No one can imagine a world where plastics do not exist.In its natural state, plastic is very malleable and ductile therefore we have to mold and harden it to suit our requirements.

To achieve desirable results, first the molten plastic, which is in liquid state, is set into various empty moulds. Several reliable China tool makers like HITECH INTERNATIONAL ENTERPRISESdabbles in to the waters of custom molding and produce marketing, promotional and personal customized stuff such as traffic signs, trays, mugs etc.

There are a wide variety of processes available through which a plastic molding task can be easily accomplished. A few essential factors such as budget, resources and expertise of the company you are hiring to accomplish the task should be well considered before choosing any particular process.

Different kinds of processes are given below with a detailed info:

1. Injection Molding

A hollow mold is taken and is filled with hot molten liquid plastic. The mold is removed once the plastic sets and cools to a comfortable temperature. This process is used to produce prototypes and even used in mass production of various kinds of products like caps of bottles, toys and even mobile stands

2. Blow Molding

A molten tube is taken and hot liquid molten plastic is poured into it from a barrel held vertically above. Then the mold is tightly closed and pressure is applied to confirm its shape. After the cooling period is over, the hollowed out part is taken out of the tube. Containers and bottles are some common examples

3. Compression Molding

Mold is broken into two equal halves and heated till its red hot. Afterwards a slug of hard plastic is vertically compressed between the two. The parts which are formed are allowed to air cool. This process is a lot cheaper than the rest.

4. Film Inserted Molding

In this process an image is taken and then embedded under the molded part’s surface. Afterwards the fabric is inserted and then a shot of plastic is injected.

5. Gas Assist Molding

This process is suitable to create hollowed parts. A gas which has been New water mold temperature control machine highly pressurized is then used to fill the mold’s cavity with the help of plastic.

Plastic molding is known to becomplex technical process and needs guidance of experts like various reliable China tool makers such as HEC, MOLD&ENG. INC. to give a suitable result and remain competitive in the market. Itis highly recommended that you employ a systematic and scientific study before you go into this endeavor.

This article is written by Doyle Clinton on behalf of Hecmold, this is having topics on Cheap molds, Rapid protopype mold, and many more.